PRODUCTS

/PRODUCTS/Roots Blower-G

Roots Blower-G

  •  
    Specifications
    1,Sweden SKF bearings.
    2,Low noise with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the airflow noise is much lower compared to typical straight-lobe roots blower. The noise level can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of
    blower can be significantly improved.
    3, High adiabatic efficiency with design of helical tri-lobe roots rotors, the airflow pulsation is less and the air streamline
    would be more stable. Therefore the fluctuation in airflow is less and then the energy waste can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency
    can be raised up to 20%.
    4, Super Energy saving Compared to the typical roots blower under the same operation conditions of discharge pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be lower by 20
     

    Model

    Speed(r/min)

    Flow( m³ /min)

    Pressure(kpa)

    Weight(kg)

    SCYSR-50

     1110-2130

    0.78-2.48

    9.8-73.5

    71

    SCYSR-65

    1110-2130

    1.08-3.74

    9.8-73.5

    82

    SCYSR-80

    1140-1900

    2.35-5.43

    9.8-78.5

    125

    SCYSR-100

    1060-1980

    3.27-9.07

    9.8-78.5

    156

    SCYSR-125

    980-1855

    5.36-12.48

    9.8-78.5

    236

    SCYSR-150

    810-1735

    10.38-27.05

    9.8-78.5

    395

    SCYSR-175

    970-1622

    19.66-38.68

    9.8-58.9

    696

    SCYSR-200

    810-1480

    26.32-59.20

    9.8-78.5

    905

    SCYSR-250

    1100-1485

    54.78-72.83

    9.8-49.5

    1755

    SCYSR-300

    995-1480

    61.5-97.52

    9.8-58.9

    2255

    SCYSR-350

    650-985

    105.6-188.7

    9.8-58.9

    3451

     
     


Copyright(C)2015 JINAN SHANGHANGDA Machinery Co., Ltd. All rights reserved.鲁ICP备19012989号-4